Electronics Module
Waveshare ST-LINK/V2 (EN), STM Programmers & Debuggers
$95.00
Now:
$74.00
Description1. The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32...
Waveshare Open8S208Q80 Standard, STM8 Development Board
$53.00
Now:
$41.00
OverviewOpen8S208Q80 is a STM8 development board that features a STM8S208MB device as the microcontroller. It supports further expansion with various optional accessory boards for specific application. The modular and open design makes it the ideal for...
Waveshare STM8-QFP64-0.5, Programmer Adapter
$128.00
Now:
$99.00
Features1. 4-pin SWIM Port for programming or testing2. External crystal can be connected via on board socket3. All the MCU pins are accessible on expansion connectorsSupported DevicesSTM8 microcontroller in QFP64(0.5mm pitch) package with compatible...
Waveshare STM8-QFP48, Programmer Adapter
$108.00
Now:
$83.00
Yamaichi IC Test & Burn-in Socket with a simple board, especially for STM8 microcontroller in QFP48(0.5mm pitch) packageFeatures1. 4-pin SWIM Port for programming or testing2. External crystal can be connected via on board socket3. All the MCU pins are...
ST-LINK/V2 (mini), STM Programmers & Debuggers
$27.00
Now:
$21.00
DescriptionMini ST-LINK/V2 on a small single board, an extreme low cost solution for in-circuit debugger/programmer for STM8 and STM32.Features1. Onboard 500mA self-recovery fuse to avoid harming by short circuit2. Dual voltage output (3.3V/5V), easy for...
Waveshare RPi Motor Driver Board
$57.00
Now:
$44.00
Raspberry Pi Expansion Board, DC Motor / Stepper Motor DriverFeatures1. Supports Raspberry Pi A+/B+/2B/3B/3B+2. Freescale H-bridge driver MC33886, controls DC motors to turn in both directions3. Onboard 5V regulator, provides power to Raspberry Pi4...
Waveshare USB TO RS232 / RS485 / TTL Industrial Isolated Converter
$51.00
Now:
$40.00
OverviewThis is an industrial USB to RS232/485/TTL isolated converter with original FT232RL inside. It features embedded protection circuits such as power isolation, ADI magnetical isolation, and TVS diode, etc. Whats more, the USB TO RS232/485/TTL comes...
Waveshare 4 Port USB HUB HAT for Raspberry Pi
$22.00
Now:
$17.00
Overview1. This is a 4 port USB hub for Raspberry Pi, provides more USB capability to your Pi, what's more, it features USB to UART converter for easy serial communication.2. It can work with various versions of the Pi, and the size of the board is...
Waveshare USB3300 USB HS Board
$26.00
Now:
$21.00
OverviewThe USB3300 USB HS Board is an accessory board which acts as the USB high-speed external PHY device for ULPI interface, features the USB3300, MIC2075-1BM onboard.FeaturesUSB3300, MIC2075-1BM, ULPI interface
Waveshare RS485 CAN Shield, RS485 CAN Shield Designed for NUCLEO/XNUCLEO
$23.00
Now:
$18.00
OverviewThe RS485 CAN Shield will easily enable RS485/CAN communication functions for your NUCLEO/XNUCLEO Arduino boards.Features1. Arduino standard interfaces, compatible with Arduino boards like Arduino UNO, Leonardo, NUCLEO, XNUCLEO- When using with...
2.8 inch Touch LCD Shield for Arduino
$38.00
Now:
$29.00
Features1. Resistive touch screen TFT LCD, 2.8inch, 320x240 resolution2. Standard Arduino interface, compatible with development boards like : Arduino UNO, 3. Leonardo, UNO PLUS, NUCLEO, XNUCLEO4. Onboard stand-alone touch controller, better touching...
3.5 inch Touch LCD Shield for Arduino
$47.00
Now:
$36.00
Features1. Resistive touch screen TFT LCD, 3.5inch, 480x320 resolution2. Standard Arduino interface, compatible with development boards like : Arduino UNO, 3. Leonardo, UNO PLUS, NUCLEO, XNUCLEO3. Onboard stand-alone touch controller, better touching...
4 inch Touch LCD Shield for Arduino
$56.00
Now:
$43.00
Features1. Resistive touch screen TFT LCD, 4inch, 480x320 resolution2. Standard Arduino interface, compatible with development boards like : Arduino UNO, Leonardo, UNO PLUS, NUCLEO, XNUCLEO3. Onboard stand-alone touch controller, better touching than...
Waveshare Adapter Board for Arduino & Raspberry Pi
$38.00
Now:
$29.00
OverviewArduino is a massive ecosystem, if there is a way for the Raspberry Pi GPIO interface to adapt to Arduino pinouts, it is possible to use the Pi together with vast Arduino shields and hardware/software resources. The ARPI600 is just intended for...
Waveshare NB-IoT HAT for Raspberry Pi, for Europe, Asia, Africa, Australia
$43.00
Now:
$33.00
NB-IoT HAT for Raspberry Pi, Based on SIM7020E, B1/B3/B5/B8/B20/B28 BandsApplicable Region1. SIM7020E is mainly applicable in Europe, Asia, Africa, Australia.2. Please check the supported bands according to your local service provider when placing order...
Waveshare L76X Multi-GNSS HAT for Raspberry Pi, GPS, BDS, QZSS
$53.00
Now:
$41.00
L76X Multi-GNSS HAT for Raspberry Pi, Supports GPS, BDS, QZSSOverview1. This is a Raspberry Pi GNSS HAT which supports Multi-GNSS systems: GPS, BDS, and QZSS, with advantages such as fast positioning, high accuracy, low power consumption, and so on.2. It...
Waveshare GSM/GPRS/GNSS/Bluetooth HAT for Raspberry Pi
$57.00
Now:
$44.00
GSM/GPRS/GNSS/Bluetooth HAT for Raspberry Pi, Based on SIM868Overview1. This is a handy, low power Raspberry Pi HAT which features multi communication functionalities: GSM, GPRS, GNSS and Bluetooth.2. It allows your Pi to easily make a telephone call,...
Waveshare 4G / 3G / 2G / GSM / GPRS / GNSS HAT for Raspberry Pi, LTE CAT4, for Southeast Asia, West Asia, Europe, Africa
$131.00
Now:
$102.00
4G/3G/GNSS HAT for Raspberry Pi, Based on SIM7600E-HApplicable Region1. SIM7600A-H is mainly applicable in North America (US, CA, MX), SIM7600E-H is mainly applicable in Southeast Asia, West Asia, Europe, Africa, SIM7600CE-T is mainly applicable in China...
Waveshare 4G / 3G / GNSS HAT for Raspberry Pi, LTE CAT4, for North America
$124.00
Now:
$96.00
4G/3G/GNSS HAT for Raspberry Pi, Based on SIM7600A-HApplicable Region1. SIM7600A-H is mainly applicable in North America (US, CA, MX), SIM7600E-H is mainly applicable in Southeast Asia, West Asia, Europe, Africa, SIM7600CE-T is mainly applicable in China...
Waveshare 4G / 3G / 2G / GSM / GPRS / GNSS HAT for Raspberry Pi, LTE CAT4, for China
$114.00
Now:
$88.00
Overview1. The SIM7600A-H 4G HAT is a 4G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption. 2. You can connect this 4G module with computer to surf the...